Replacing a standard window in an apartment building in 2026 costs approximately €418 to €814 per unit, including installation. Key factors influencing the final price include the frame material (PVC, wood, aluminium), glazing unit (double or triple-glazed), the Uw heat transfer coefficient, and crucially for comfort, the Rw acoustic insulation value.
Shocking fact: According to the World Health Organisation (WHO), traffic noise is the second biggest environmental threat to health in Europe, right after air pollution. Long-term exposure to sounds above 55 decibels (dB) – the typical level on a moderately busy street – leads to heart problems, sleep disturbances, and chronic stress. Now, imagine how many decibels a tram braking outside your window generates? This was the exact problem faced by our protagonist, Mr. Thomas, living on the third floor of an apartment building next to a major arterial road in Wrocław. We present a case study of his fight for silence.
How much did Mr. Thomas' window replacement cost exactly?
The total cost of replacing four windows and one balcony door in Mr. Thomas' apartment was approximately €4,616. Our analysis shows that this amount reflects current market prices in 2026 for products with high acoustic and thermal performance.
Mr. Thomas opted for PVC windows with enhanced acoustic insulation (Rw = 45 dB) and an excellent heat transfer coefficient (Uw = 0.7 W/m²K). The table below details the costs for his 65-square-metre apartment. The data clearly shows that windows with specialised parameters, rather than the installation itself, accounted for the largest share of the price.
Table: Detailed Window Replacement Cost Estimate in 2026 (Case Study)
| Element | Dimension (width x height) | Parameters | Quantity | Unit Price (net) | Value (net) |
|---|---|---|---|---|---|
| Kitchen casement window | 145 cm x 140 cm | PVC, triple-glazed, Rw=45dB, Uw=0.7 | 1 | approx. €721 | approx. €721 |
| Living room fixed window | 220 cm x 140 cm | PVC, triple-glazed, Rw=45dB, Uw=0.7 | 1 | approx. €907 | approx. €907 |
| Casement balcony door | 85 cm x 220 cm | PVC, triple-glazed, Rw=45dB, Uw=0.7 | 1 | approx. €791 | approx. €791 |
| Bedroom casement window | 145 cm x 140 cm | PVC, triple-glazed, Rw=45dB, Uw=0.7 | 1 | approx. €721 | approx. €721 |
| Installation with finishing ("warm installation") | - | Tapes, foam, sealing | 4 windows + 1 door | approx. €151/unit | approx. €756 |
| TOTAL (net) | approx. €3,895 | ||||
| VAT (8%) | approx. €312 | ||||
| TOTAL (gross) | approx. €4,207 | ||||
| Disposal of old windows | - | - | 5 units | - | FREE |
Want to know the exact price for your apartment? Check our free online window configurator and get a quote in 3 minutes.
What is a window with enhanced acoustic insulation?
A window with enhanced acoustic insulation is a structure specifically designed to maximally dampen noises coming from outside. Its effectiveness is defined by the Rw coefficient (weighted sound reduction index), expressed in decibels (dB). The higher the Rw value, the better the protection against noise. Standard windows have an Rw level of 30-32 dB, whereas acoustic windows, such as in our case study, achieve values of 40-47 dB, which in practice means a noise reduction of over 75%.
What window parameters are key in the fight against noise?
A window's ability to suppress noise does not depend on a single element, but on several cooperating components. Industry experts confirm that only their combination yields spectacular results, as seen in Mr. Thomas' apartment. Here are the most important ones.
- Thickness and construction of the glazing unit: This is an absolutely crucial element. Acoustic windows use triple-glazed units where each pane of glass has a different thickness (e.g., 4mm, 6mm, 8mm). The varying thickness ensures that sound waves of different frequencies are more effectively dampened.
- Use of acoustic film (PVB): A special, flexible PVB film is placed between the panes. It acts as a shock absorber for vibrations, dispersing the energy of sound waves and converting it into heat, rather than allowing it to pass indoors.
- Asymmetrical construction: The outermost pane in the unit is usually the thickest or laminated with film to "take the first hit" of the sound wave.
- Type of gas in the inter-pane space: Heavy noble gases, such as krypton or argon (more commonly used and cheaper), transmit acoustic vibrations less effectively than ordinary air. Mr. Thomas chose windows filled with argon.
- Number and quality of seals: Modern PVC windows feature a system of 2 or 3 peripheral seals. These not only provide thermal insulation but also press the sash against the frame, eliminating micro-gaps through which noise could penetrate.
- Correct installation ("warm installation"): Even the best acoustic window will not perform its function if poorly installed. The use of mounting foam, as well as special vapour-permeable and vapour-proof tapes, guarantees complete sealing of the window-to-wall connection.
Does window replacement in an apartment building require permission in 2026?
In most cases, replacing windows in an apartment building does not require building permission or notification, provided that the original dimension and division of the window are maintained. We checked this – here are the facts: in many EU countries, building works consisting of renovation do not require a building permit. Window replacement is often classified as a renovation.
A problem arises when planning to change the size of the window opening, its shape, or division (e.g., from a double-sash to a single-sash window). Such a change is an alteration to the façade, which is a common part of the building and affects its appearance. In such a situation, consent from the housing cooperative or homeowner association must be obtained. If the building is listed, additional consent from the heritage conservator will be necessary. Mr. Thomas maintained the original dimensions, thus avoiding additional formalities. However, before starting any work, it is always advisable to check the internal regulations of the cooperative/association. Want to know more? Read our article: Window Replacement in Apartment Buildings and Building Regulations in 2026.
What benefits, besides silence, did the window replacement bring?
Mr. Thomas' main goal was noise reduction, and this goal was achieved with flying colours – sonometer measurements showed a drop from 62 dB to 47 dB with the window closed during peak hours. The surprising conclusion, however, was different: the owner was most impressed by the heating savings.
Old, leaky PVC windows from the 1990s had a heat transfer coefficient of approx. 2.5 W/m²K. New Wingedas windows with a triple-glazed unit and warm edge spacers offer Uw=0.7 W/m²K. This means over three times less heat loss. Mr. Thomas shared his heating bills with us – in the winter season of 2025/2026, after window replacement, his bills were on average 30% lower compared to the previous year, with similar outdoor temperatures. An additional benefit was the elimination of the "cold pane" phenomenon and draughts around the sills, which significantly enhanced living comfort.
Calculate potential savings for your home. Compare the differences between double and triple-glazed windows in our guide.
How did the window replacement process proceed step-by-step?
The entire process from the first contact to the completion of works took Mr. Thomas 3 weeks. The replacement of 5 units (4 windows + balcony door) itself took the installation team only one working day (approx. 9 hours). An organised process is key to success and minimising inconvenience for residents. Our analysis shows that professional companies operate according to the following scheme:
- Free measurement and consultation: The first step is a visit by a technical advisor. This is a crucial stage where window openings are precisely measured, and the client's needs (silence, warmth, security) are discussed. At this stage, Mr. Thomas learned about the possibility of using windows with enhanced acoustic insulation.
- Preparation of offer and contract signing: Based on measurements and selected parameters, the company prepares a detailed quote and contract. The contract should clearly specify the window specifications, completion date, scope of installation work, and warranty conditions.
- Window production time: Custom-made windows are a "tailor-made" product. The waiting time for production in 2026 ranges from 2 to 5 weeks, depending on the chosen model and colour. In Mr. Thomas' case, it was 3 weeks.
- Removal of old windows: On the agreed date, the installation team begins work. The first stage involves securing the apartment (foliage on floors and furniture) and removing old window frames.
- Preparation of openings and installation of new windows: After removal, the reveals are cleaned and prepared. Then the new window frame is set in the opening and levelled, secured with anchors or dowels.
- Sealing ("warm installation"): This is the most important stage of installation. The gap between the frame and the wall is filled with polyurethane foam. On the outside, vapour-permeable tape is used (protects against rain but allows walls to "breathe"), and on the inside, vapour-proof tape (protects the foam from moisture from the room).
- Installation of sashes, adjustment, and finishing works: After the frames are installed, the sashes, handles, and sills are fitted. The team adjusts the hardware to ensure the windows open and close smoothly. Finally, plastering work is carried out around the windows.
- Cleaning and work acceptance: The professional team cleans up after completing the work and, together with the client, accepts the work, instructing them on how to properly use and maintain the new windows.
Planning a replacement? Read our guide: How to prepare your home for window replacement – a complete guide, to avoid surprises.
Why it is no longer worthwhile to repair old windows?
Clients most often ask whether, instead of replacing, old windows can simply be repaired or sealed. The answer is: in 9 out of 10 cases, it is not economically justified. Repairing worn-out hardware or replacing seals in a 15-year-old PVC window is like renovating an engine in a rusty car – it will help temporarily, but will not solve fundamental problems.
Old glazing units, often already unsealed, have terrible thermal parameters. After years, plastic profiles lose their colour and properties, becoming brittle. Technology has advanced so much that even the cheapest new window from a DIY store has better parameters than a "flagship" from two decades ago. By investing in new windows, you invest in technology that genuinely lowers bills (as Mr. Thomas' example showed), ensures silence, and comes with a WARRANTY for many years. The cost of professional adjustment and seal replacement in old windows can reach up to 30-40% of the price of a new window, without providing even a fraction of the benefits. We checked this – here are the facts: the return on investment in new, energy-efficient windows occurs on average after 7-9 years, solely due to heating savings.
Are you unsure if your windows qualify for replacement? Book a free visit and quote from our expert, who will assess their technical condition.